Wax & Tuning

Side edge tool for de-burring and edge setting -88 and 90 deg.

Made to Last A simple 88° bevel guide that can be used with any file. This tough side edging tool has a super smooth glide plate that glides over the base of your skis or board without leaving a trace. - Smooth stainless steel glide plate - Clamp to hold file in place - Bevel: 88° - Bevel Guide Weight: 105g - Clamp Weight: 80g *FILE NOT INCLUDED

Use the Reed Creek White Nylon Brush to clean your bases prior to waxing, opening up the structure of the base to receive fresh wax. This brush is also a great all around waxing brush for cleaning out wax particles in skis and snowboards after scraping.

The ultimate precision file guide. Machined to exact degrees, each file guide goes through a strict quality control process to insure degree accuracy. Hard anodized aluminum body with a 35 thousandths stainless plate attached to its base. Available in 2° & 3°.

8" file features the desired 2nd cut tooth configuration (16 teeth per cm). Icecut files feature unique tooth geometry, along with super straight Swiss steel. The extreme Rockwell hardness makes this file stand out among others.

Swix Adjustable Base Edge File Holder TA0515. 0.5° to 1.5° * File not included

SWIX base edge file holder, from 0.5º to 2º, steps of 0.05º. Easy to adjust the angle. * File not included

Get a clean, smooth base, all with one little bag. The Swix Base Cleaner Set includes a can of spray-on base cleaner to loosen up all the collected gunk on the bottoms of your skis, and a roll of 20m Fiberlene fabric to wipe it all away.

The kit contains an adjustable file holder with edge file as well as a coarse grindstone to remove burrs and a fine diamond grindstone to polish the edges at the end. The file holder can be adjusted to grind side edge at 88 ° or 87 ° and 0.5 / 1 deg base.

Use the Swix Pocket Edger to sharpen the base and side edges of your skis or snowboard when you're on the mountain.It allows you to file your side edge to 88 and 89 degrees, and the base edge to 0.5 and 1 degree.

Swix Sidewall Cutter is used to remove the plastic edge that lies next to the steel edge on the side edge of the ski. In order for the file to grip the steel edge, the plastic must be lower than the steel edge. Round insert and square insert included.

A must-have to use for final passes on side and base edge. Hones and polishes the edge to refine the exact edge geometry from previous tools. 125x25 mm.

T107X 8 inch Bastard First Cut: 8”/20 cm. 13 teeth per cm. Professional chromed Bastard removal/setup file. Best file for initial side bevel and setting side angle.